2003 CATERPILLAR 140H

    265.802 DT 
    Prix rentré à: USD $87,900
    Localisation de la machine:1268 Cronson Blvd Building ECrofton, Maryland, États-Unis 21114

    Information sur le vendeur

    Voir les informations du vendeur

    Zadoon LLC

    Contact:MT Sales

    Téléphone:+1 443-914-6000

    Crofton, Maryland, États-Unis 21114

    +1 443-914-6000

    Cacher les miniatures

    Description

    - EROPS - Multi-shank rear ripper - Trimble GCS900 grade control - Trimble CB430 control box in the cab - One mast GPS with head unit with fully integrated hydraulics - Comes with 14 ft moldboard - 12 ft moldboard to fit this unit available at an extra cost. Tandem-drive motor grader on the Cat 3176C ATAAC engine with an electronically controlled 8F/6R direct-drive power shift. The Trimble system grades to design from the cab, which cuts out staking, grade checking, and extra passes, and saves the buyer a new 3D retrofit that typically runs $55k to $100k. VHP prevents tire spin and drivetrain strain in the low gears and keeps the machine from bogging down in the high gears. It has load-sensing hydraulics with lever controls, an articulated frame, front wheel lean, hydraulic moldboard side shift and tip, and a slip clutch on the circle drive. Sealed oil-disc brakes are on all four tandem wheels. (Se Habla Español)

    Spécifications

    Année2003
    fabricant CATERPILLAR
    Modèle140H
    Heures17 000
    Numéro de sérieCAT0140HAAPM00620
    EtatOccasion
    Numéro de StockZID-148912
    Protection contre le retournementCabine
    Année2003|
    fabricant CATERPILLAR|
    Modèle140H|
    Heures17 000|
    Numéro de sérieCAT0140HAAPM00620|
    EtatOccasion|
    Numéro de StockZID-148912|
    Protection contre le retournementCabine|
    montrer en paragraphe

    Your current browser cannot run our content, please make sure your browser is fully updated or try one of the browsers below.

    Your browser is not supported

    Microsoft Edge

    Google Chrome

    Mozilla Firefox